Select Template
Continuous Beam
|
Click on the cells in table above to insert / update the beam data
|
|
Multi-Storey Frame
|
Click on the cells in table above to insert / update the Portal Frame data
|
|
Collar + Splayed Pods is now a zone geometry.
A pod zone can occur at the base, in the middle, or higher up the tower. If Repeats is greater than 1, the complete collar-pod module is reproduced vertically while the plan dimensions taper continuously from the zone bottom to the zone top.
For 3-leg towers, the X/Side dimensions define the equilateral-triangle side and the Y boxes are disabled. For 4-leg towers, X and Y may be different.
| Zone |
Height
(m) |
Bottom X / Side
(m) |
Bottom Y
(m) |
Top X / Side
(m) |
Top Y
(m) |
Repeats |
Zone Geometry |
Bracing |
Sub-panels |
Pod Top
% |
Actions |
Standard Lattice: Repeats acts as the number of major lattice modules; Sub-panels divides each module vertically before applying the selected face bracing.
Collar + Splayed Pods: each repeat starts from the outer plan corners at the lower module boundary and opens into triangular pod cells at the upper collar boundary. Pod Top % controls how far those cells extend along the collar edges; 50% reaches the edge mid-points.
Load Combinations
Mass Source
Show Loading
Load Case
Define Materials
(reassing all sections if already modelled)
Assign Frame Sections
| Material |
|
| Section |
|
| |
| fy Grade |
|
|
| Library |
|
| Family |
|
| Section |
|
|
|
|
|
| |
|
| |
| f'b Bending MPa |
β |
| f't Tension MPa |
β |
| f's Shear MPa |
β |
| f'c Compression MPa |
β |
| Ο1 (T2.1 -Housing) |
β |
| Ο2 (T2.1 Buildings) |
β |
| Ο3 (T2.1 Essential) |
β |
| f'p (TH2.2 Bearing Per.) |
β |
| f'l (TH2.2 Bearing Par.) |
β |
| f'sj (TH2.2 Shear Jnt) |
β |
| f'tp (TH2.2 Tens Per.) |
β |
| K1 - Duration (2.4.1) |
β |
| K4 Seasoning (2.4.2) |
β |
| K6 Temprature (2.4.3) |
1.00 |
| K9 Sharing (2.4.5) |
1.00 |
| K12 Bending (3.2.4) |
β |
| lenderness Coeff. S1 |
β |
| Bending Constant Οb |
β |
| Bending Capacity |
β |
| Shear Capacity |
β |
|
Sections and Materials libraray : MIT License Β© 2023 Joseph Gattas β
Full Text
|
|
Design Densities : Reference: TABLE H2.4, AS1720.1-2010 (Amendments 1/2/3)
(Β© Standards Australia. For official copy see
Standards Australia
).
|
|
|
|
Parametrics
select elements to change properties
Steel Sections
| Library |
|
| Family |
|
| Section |
|
|
|
|